More than 3000 square meters of warehouse, with a large stock
Light weight, small size, easy to air delivery
Injection molding department and machining department
24/7 one-on-one engineer service support
Circuit board equipment pump refers to the pump used in printed circuit board (PCB) manufacturing equipment to transport chemical liquids or cleaning fluids to ensure the smooth progress of the manufacturing process. The production of circuit boards involves many chemical processes (such as etching, coating, cleaning, etc.), and the role of the pump is to accurately and safely transport various solutions or liquids to avoid adverse effects of chemicals on the circuit board. Circuit board pumps typically offer corrosion resistance, precise control, and high stability.
Introduction: The in-tank pump of circuit board equipment is a special pump used in the manufacturing process of printed circuit board (PCB), which is used for liquid circulation, mixing and transportation in various chemical tanks. The in-tank pump is immersed, usually fixed above the tank, through the pump head deep into the tank to achieve liquid circulation and treatment. The in-tank pump can not only effectively stir the liquid in the tank, ensure the uniform concentration of the chemical solution, but also help to achieve the filtration and transportation of the liquid in the tank.
Feature:
Strong corrosion resistance: The chemical liquid commonly used in the production process of the circuit board is highly corrosive, so the pump in the tank is generally made of polymer materials (such as PP, PVDF, etc.), and has excellent acid and alkali resistance and corrosion resistance.
High temperature resistance: In-tank pumps usually need to adapt to the use of higher temperature environments, especially in hot dip plating, etching and other processes, need to be able to withstand 60 ° C to 90 ° C or even higher temperatures.
Good sealing performance: Since the pump in the tank is immersed in liquid, sealing performance is critical to prevent liquid leakage affecting the equipment and the environment.
Simple structure, easy maintenance: The tank pump design is compact, easy to install, maintenance is also more convenient, suitable for long-term continuous operation.
Type:
Magnetic drive tank pump: through magnetic coupling drive, avoid shaft seal leakage, suitable for no leakage requirements.
Mechanical seal tank pump: the use of mechanical seals, suitable for high pressure conditions, but the relative maintenance cost is slightly higher.
Non-sealed tank pump: such as air lift pump, the use of air to drive liquid flow, no sealing structure.
Specification:
Introduction: The in-tank pump of circuit board equipment is a special pump used in the manufacturing process of printed circuit board (PCB), which is used for liquid circulation, mixing and transportation in various chemical tanks. The in-tank pump is immersed, usually fixed above the tank, through the pump head deep into the tank to achieve liquid circulation and treatment. The in-tank pump can not only effectively stir the liquid in the tank, ensure the uniform concentration of the chemical solution, but also help to achieve the filtration and transportation of the liquid in the tank.
Feature:
Strong corrosion resistance: The chemical liquid commonly used in the production process of the circuit board is highly corrosive, so the pump in the tank is generally made of polymer materials (such as PP, PVDF, etc.), and has excellent acid and alkali resistance and corrosion resistance.
High temperature resistance: In-tank pumps usually need to adapt to the use of higher temperature environments, especially in hot dip plating, etching and other processes, need to be able to withstand 60 ° C to 90 ° C or even higher temperatures.
Good sealing performance: Since the pump in the tank is immersed in liquid, sealing performance is critical to prevent liquid leakage affecting the equipment and the environment.
Simple structure, easy maintenance: The tank pump design is compact, easy to install, maintenance is also more convenient, suitable for long-term continuous operation.
Type:
Magnetic drive tank pump: through magnetic coupling drive, avoid shaft seal leakage, suitable for no leakage requirements.
Mechanical seal tank pump: the use of mechanical seals, suitable for high pressure conditions, but the relative maintenance cost is slightly higher.
Non-sealed tank pump: such as air lift pump, the use of air to drive liquid flow, no sealing structure.
Specification:
Introduction: In circuit board equipment, the vertical pump (also known as the vertical centrifugal pump) is an important component for the transmission of liquids, usually used in acid and alkali liquids, cleaning agents, corrosive liquids and other chemical liquids circulation or transportation. The circuit board production process involves a large number of chemical liquids, and requires stable, efficient and corrosion-resistant pump equipment to ensure the continuity and stability of the production process.
Feature:
High corrosion resistance: Special materials and sealing design make it have a long service life in strong acid and alkali environment.
Easy installation and maintenance: The vertical design saves space and is usually easy to repair, reducing downtime.
Strong stability: can run stably for a long time, suitable for continuous production of the circuit board process.
Note:
The selection should focus on the corrosion, temperature, viscosity, flow and head parameters of the medium to ensure that the selected pump can meet the process requirements and extend the service life of the pump.
Specification:
Introduction: The vertical pump outside the tank is a special pump used for circuit board production equipment, which is mainly designed for the circulation, filtration, transmission and other operations of the tank liquid. Compared with the traditional tank pump, the tank outside the vertical pump is installed on the outside of the tank body, not in direct contact with the corrosive liquid, making its maintenance more convenient, and suitable for dealing with acid, alkali, potions and other corrosive chemical liquids.
Feature:
Easy maintenance: Because it is installed outside the tank body, it is easy to check and replace, and there is no need to stop or remove the pump from the tank.
High safety: the external structure avoids problems such as liquid overflow and leakage in the tank, and the non-sealed design is used to effectively avoid the risk of leakage.
High efficiency and energy saving: Reasonable design, can achieve efficient liquid circulation and transportation at low power, reduce energy consumption.
Note:
Suitable for all kinds of corrosive liquids: such as acids, alkalis and organic solvents.
Pay attention to the selection of anti-corrosion materials: The appropriate pump material should be selected according to the chemical liquid used in the specific process to avoid corrosion or damage caused by material incompatibility.
Temperature control: Pay attention to the control of temperature during use, some vertical pumps outside the tank are more sensitive to temperature, and high temperature may affect the service life of the pump.
Specification:
Introduction: The vertical pump outside the tank is a special pump used for circuit board production equipment, which is mainly designed for the circulation, filtration, transmission and other operations of the tank liquid. Compared with the traditional tank pump, the tank outside the vertical pump is installed on the outside of the tank body, not in direct contact with the corrosive liquid, making its maintenance more convenient, and suitable for dealing with acid, alkali, potions and other corrosive chemical liquids.
Feature:
Easy maintenance: Because it is installed outside the tank body, it is easy to check and replace, and there is no need to stop or remove the pump from the tank.
High safety: the external structure avoids problems such as liquid overflow and leakage in the tank, and the non-sealed design is used to effectively avoid the risk of leakage.
High efficiency and energy saving: Reasonable design, can achieve efficient liquid circulation and transportation at low power, reduce energy consumption.
Note:
Suitable for all kinds of corrosive liquids: such as acids, alkalis and organic solvents.
Pay attention to the selection of anti-corrosion materials: The appropriate pump material should be selected according to the chemical liquid used in the specific process to avoid corrosion or damage caused by material incompatibility.
Temperature control: Pay attention to the control of temperature during use, some vertical pumps outside the tank are more sensitive to temperature, and high temperature may affect the service life of the pump.
Specification:
Introduction: Magnetic pump is a kind of pump equipment widely used in circuit board production equipment, mainly used for the transmission of chemical solutions, acid and alkali liquids and other corrosive media. In circuit board production, magnetic pumps can reduce the risk of chemical leakage and improve the safety and stability of production.
Feature:
Leakproof: Magnetic pumps do not have mechanical seals, avoiding the risk of leakage in the seal of traditional pumps, so it is suitable for handling highly corrosive and volatile chemical liquids.
Strong corrosion resistance: Magnetic pumps are usually made of corrosion-resistant materials (such as polytetrafluoroethylene, ceramics, etc.), which can adapt to the transmission needs of acid and alkaline liquids.
Low maintenance requirements: Because there is no mechanical seal structure, the magnetic pump has a long life under normal use, low failure rate, less maintenance needs, and reduces the downtime and maintenance time in the production process.
High safety: In the circuit board industry, the use of magnetic pumps can significantly reduce the potential harm to the environment and operators, ensuring the safety of equipment and operators.
Note: When choosing a magnetic pump, it is necessary to consider the flow rate of the pump, head, corrosion resistance of the material and the use of the environment. In addition, the magnetic coupling parts and bearings of the pump should be checked regularly to avoid failures caused by wear.
Specification:
Introduction: The self-priming pump in the circuit board equipment is mainly used for the treatment of industrial water and chemical liquids and other media, often used for cleaning, etching and electroplating process links.
Feature:
Automatic suction: The self-priming pump can automatically inhale the liquid after starting, and there is no need to pump in advance, which greatly improves the convenience of operation.
Corrosion resistance: Acidic and alkaline chemical liquids will be used in the circuit board industry, so self-priming pumps are usually made of corrosion-resistant materials, such as stainless steel, PVDF, PP, etc., to prevent the corrosion of the medium to the pump body.
Suitable for a variety of media: self-priming pump can deal with particles, suspended solids and other impurities of the liquid, suitable for PCB production containing impurities or particles of chemical liquid transmission.
Easy maintenance: Self-priming pump structure is simple, repair and maintenance is relatively easy, can reduce downtime.
Note:
Self-priming pump selection points
Material selection: Suitable corrosion-resistant materials should be selected according to the chemical properties of the medium, such as PVDF, ceramics, PTFE, etc.
Flow and head: Select the flow and head of the self-priming pump according to the process requirements to ensure that the pump can meet the production needs.
Self-priming height: Determine the self-priming height based on the installation position of the device to ensure stable self-priming after the pump starts.
Specification:
Introduction: The centrifugal pump in the circuit board equipment is mainly used to transport the liquid (such as chemicals, cleaning water, etc.) to the inside of the equipment for cleaning, corrosion, grinding and other process treatment. The centrifugal pump commonly used in circuit board equipment generally has the characteristics of corrosion resistance, high temperature resistance, strong sealing, etc., to adapt to the complex chemical environment and harsh process requirements in the production of printed circuit board (PCB).
Feature:
Corrosion resistance: The use of special materials (such as stainless steel, polytetrafluoroethylene, etc.) to manufacture pump body and impeller, can effectively resist the impact of acid, alkali, salt and other corrosive chemical liquids.
Sealing: The chemicals in the production of the circuit board are volatile, so the pump is usually equipped with a double-layer mechanical seal to reduce leakage.
High efficiency and stability: stable flow, high transport efficiency, can support long-term continuous operation to meet production needs.
High temperature resistance: It is used for conveying cleaning liquid or chemical liquid with high temperature to ensure that the equipment works normally under high temperature conditions.
Note:
Centrifugal pump selection
When choosing a centrifugal pump, it is necessary to comprehensively consider flow, head, medium temperature, corrosion, viscosity and other parameters to ensure the stability and service life of the pump. At the same time, considering the convenience and efficiency of maintenance is also an important factor to ensure the normal operation of the equipment.
Specification:
102, No.14-1 Jixiang 3rd Road, Yixin Community, Longgang District, Shenzhen, Guangdong Province, China.
+ 86 181 8840 4906
eternal02023@gmail.com
We’re professional manufacturer of PCB equipment and consumable. We can give you the best advice for your requirements.
© All Rights Reserved.
WhatsApp us
Eternal Tech is committed to becoming an expert in PCB conveying systems.