Skip to content More than 3000 square meters of warehouse, with a large stock
Light weight, small size, easy to air delivery
Injection molding department and machining department
24/7 one-on-one engineer service support
Bevel gear is a conical gear usually used to transmit motion at an Angle of 90°. Its tooth surface is beveled, so unlike traditional spur gears, bevel gears can better handle the transmission of cross shafts. The use of plastic materials can reduce the weight of the overall equipment, while providing sufficient strength and toughness to reduce the friction and noise problems that may occur in metal gears.
Introduction: PP bevel gear is a conical gear with teeth shaped like an umbrella, usually used to transfer power between shafts or to change the direction of rotation. Bevel gear can have different types, such as straight bevel gear, helical bevel gear, etc., to provide smooth power transmission according to different work needs. PP (polypropylene) is a common plastic material with good corrosion resistance, wear resistance and lightweight properties.
Features:
Strong corrosion resistance: especially suitable for the working environment with more chemical substances, can effectively extend the service life of the gear.
Low friction coefficient: helps to reduce gear wear and improve system efficiency.
Lightweight: PP material is lighter than metal material, which can reduce the overall weight of the equipment.
Good processing performance: PP is easy to form and can make gears with complex shapes.
Selection confirmation:
Teeth quantity: T
Modulus: M (If you do not know M, also can tell us OD of gear)
Length of teeth.
Total length of gear.
Material.
Note: If you have big quantity inquiry, we can make new mould to reduce cost. If you have small quantity of very high precision request, we can make machine products. Support OEM/ODM.
Introduction: PVDF (polyvinylidene fluoride) is a high performance plastic material with excellent chemical stability, corrosion resistance, high temperature resistance and mechanical properties. In circuit board equipment, PVDF bevel gears can withstand high loads, friction, and have a long service life. Due to its good chemical resistance, PVDF bevel gears can work in acid and alkali environments for a long time, avoiding equipment damage due to corrosion or wear.
Features:
Strong corrosion resistance: especially suitable for the working environment with more chemical substances, can effectively extend the service life of the gear.
Low friction coefficient: helps to reduce gear wear and improve system efficiency.
Lightweight: PP material is lighter than metal material, which can reduce the overall weight of the equipment.
Good processing performance: PP is easy to form and can make gears with complex shapes.
Selection confirmation:
Teeth quantity: T
Modulus: M (If you do not know M, also can tell us OD of gear)
Length of teeth.
Total length of gear.
Material.
Note: If you have big quantity inquiry, we can make new mould to reduce cost. If you have small quantity of very high precision request, we can make machine products. Support OEM/ODM.
Introduction:
Precise transmission: PVDF bevel gears can precisely control the movement of the conveying system to ensure the stable transmission of materials on the conveying section to avoid affecting the production accuracy due to uneven transmission.
Reduce wear: The high strength, low friction properties of PVDF materials enable bevel gears to work for a long time without excessive wear, reducing maintenance costs.
High temperature resistance: Under high temperature working environment, PVDF bevel gear can still maintain good performance and adapt to the needs of some high temperature production processes.
Resistance to chemical corrosion: Various chemicals may be exposed during PCB production, and the corrosion resistance of PVDF ensures that bevel gears are not easily corroded or aged.
Features:
Strong corrosion resistance: especially suitable for the working environment with more chemical substances, can effectively extend the service life of the gear.
Low friction coefficient: helps to reduce gear wear and improve system efficiency.
Lightweight: PP material is lighter than metal material, which can reduce the overall weight of the equipment.
Good processing performance: PP is easy to form and can make gears with complex shapes.
Selection confirmation:
Teeth quantity: T
Modulus: M (If you do not know M, also can tell us OD of gear)
Length of teeth.
Total length of gear.
Material.
Note: If you have big quantity inquiry, we can make new mould to reduce cost. If you have small quantity of very high precision request, we can make machine products. Support OEM/ODM.
Introduction:
PEEK (polyether ether ketone) bevel gears are commonly used in high-precision mechanical applications such as electronics manufacturing and circuit board equipment delivery segments. It is a high-performance engineering plastic with many excellent properties that make it ideal for harsh working environments.
Features:
High temperature performance: PEEK has excellent high temperature stability and can withstand continuous operating temperatures of up to 250 ° C, which is suitable for use in environments requiring higher temperatures, especially in electronic manufacturing equipment.
Wear resistance: PEEK has high wear resistance, especially suitable for high-speed operation and frequent friction gear transmission system. Bevel gears made of PEEK can reduce wear and extend service life.
Chemical stability: PEEK has excellent chemical resistance and is able to resist many common industrial chemicals, solvents and acid-base corrosion, so it is also very reliable in chemical environments.
Low friction coefficient: The low friction coefficient of PEEK material can effectively reduce the friction of gear transmission, improve work efficiency, reduce energy consumption, and help improve the stability and accuracy of the equipment.
Radiation resistance: In some special applications, PEEK can also resist a certain degree of radiation, suitable for use in specific environments.
Selection confirmation:
Teeth quantity: T
Modulus: M (If you do not know M, also can tell us OD of gear)
Length of teeth.
Total length of gear.
Material.
Note: If you have big quantity inquiry, we can make new mould to reduce cost. If you have small quantity of very high precision request, we can make machine products. Support OEM/ODM.
Introduction:
In the conveyor section of circuit board equipment, POM bevel gear is a commonly used transmission component, which is widely used in various industrial equipment, including circuit board (PCB) production equipment. This gear is mainly used to transfer power or change the direction of power transmission, so as to drive the smooth operation of the conveying system.
Features:
High rigidity and hardness
Good self-lubrication, reduce wear
Strong fatigue resistance, suitable for long running
Chemical resistance, suitable for various industrial environments
Low cost, easy to process
Selection confirmation:
Teeth quantity: T
Modulus: M (If you do not know M, also can tell us OD of gear)
Length of teeth.
Total length of gear.
Material.
Note: If you have big quantity inquiry, we can make new mould to reduce cost. If you have small quantity of very high precision request, we can make machine products. Support OEM/ODM.
102, No.14-1 Jixiang 3rd Road, Yixin Community, Longgang District, Shenzhen, Guangdong Province, China.
+ 86 181 8840 4906
eternal02023@gmail.com
We’re professional manufacturer of PCB equipment and consumable. We can give you the best advice for your requirements.
© All Rights Reserved.
Eternal Tech is committed to becoming an expert in PCB conveying systems.
Optimized by Seraphinite Accelerator