Skip to content More than 3000 square meters of warehouse, with a large stock
Light weight, small size, easy to air delivery
Injection molding department and machining department
24/7 one-on-one engineer service support
The shaft in the conveying section of the circuit board equipment is mainly used to support the conveyor belt or roller in order to transfer the circuit board (PCB) stably and smoothly to the different processes of the equipment.
Introduction: In the conveying section of the circuit board production equipment, the titanium material axis has good corrosion resistance and mechanical properties. Because the circuit board manufacturing process needs to deal with a variety of acidic or alkaline chemicals (such as sulfuric acid, hydrofluoric acid, etc.), the common metal axis is easy to be corroded. The titanium material has excellent corrosion resistance, can maintain stability in acid and alkali environment, extend the service life of the conveying system, and reduce the maintenance frequency.
Features:
Corrosion resistance: Titanium has a strong resistance to a variety of chemicals, and is not easy to be corroded by acids, alkalis and salts.
High strength-to-weight ratio: The titanium shaft is lighter but has high strength, which is suitable for applications where the overall weight of the equipment needs to be reduced.
High temperature stability: can maintain strength at higher temperatures, suitable for a variety of production process temperature requirements.
Low magnetism: Titanium has low magnetism, which helps to reduce the impact of electrical properties caused by magnetic interference.
Note: In the circuit board equipment, because the process of each section is different, there will be different requirements for the potion, and the temperature. Therefore, when choosing the material of the axis, it is a very important part. The harm of choosing the wrong material is also very big, so if you do not know what material to choose, please tell us the use environment, we can give the most professional advice.
Introduction: The shaft of the conveying section of the circuit board equipment is made of 316 stainless steel, which has good corrosion resistance and strength, especially suitable for harsh industrial environments. 316 stainless steel is a kind of austenitic stainless steel with molybdenum added, which improves its resistance to pitting and crevice corrosion, so it is suitable for acid, alkali, salt and high temperature and humid heat environment, these characteristics are particularly important in the conveying section of circuit board equipment.
Features:
Corrosion resistance: 316 stainless steel shows excellent corrosion resistance in high humidity, high salinity and acid environments. The addition of molybdenum makes it better resistant to corrosive substances such as chloride ions to avoid damage to equipment in highly corrosive production environments.
High strength and toughness: 316 stainless steel has good mechanical properties, can withstand high-speed operation and load pressure, to ensure the stable operation and long service life of conveying equipment.
Oxidation resistance: 316 stainless steel still has stable oxidation resistance at high temperatures, which is particularly important for the conveying section axis in the high temperature production line environment for a long time to avoid deformation caused by thermal expansion.
Smooth surface and easy to clean: The surface of 316 stainless steel can be polished, making it more wear-resistant and easy to clean. For circuit board equipment, it is important to reduce contaminant attachment and ensure production cleanliness, and the smooth axis surface helps to reduce the accumulation of impurities.
Note: In the circuit board equipment, because the process of each section is different, there will be different requirements for the potion, and the temperature. Therefore, when choosing the material of the axis, it is a very important part. The harm of choosing the wrong material is also very big, so if you do not know what material to choose, please tell us the use environment, we can give the most professional advice.
Introduction: The stainless steel 304 material axis in the conveying section of the circuit board equipment is usually used to support the rotating motion of the conveying roller to ensure the smooth movement of the circuit board on the conveyor belt or conveying drum.
Features:
High corrosion resistance: suitable for humid or corrosive environment, extend the service life of the shaft.
Low friction and wear resistance: the finished stainless steel shaft can effectively reduce the wear of the conveyor section and reduce the maintenance frequency of the equipment.
Stability and load-bearing capacity: The structural strength of 304 stainless steel can support the load of the conveyor belt or roller and maintain the stability of the transmission system.
Note: In the circuit board equipment, because the process of each section is different, there will be different requirements for the potion, and the temperature. Therefore, when choosing the material of the axis, it is a very important part. The harm of choosing the wrong material is also very big, so if you do not know what material to choose, please tell us the use environment, we can give the most professional advice.
Introduction: The carbon steel shaft in the conveying section of the circuit board equipment is mainly used to support and drive the PCB board.
Features:
Carbon steel: Carbon steel is a kind of alloy steel mainly composed of iron and carbon elements, with high strength and wear resistance. Carbon steel is relatively good in terms of cost, mechanical properties and machinability.
Wear resistance and compression resistance: the carbon steel shaft is resistant to wear and impact when carrying and conveying, which is very suitable for long-term operation of conveying equipment.
Surface treatment: In order to prevent corrosion, carbon steel shafts are usually surface treated, such as galvanized, sprayed or blackened, to improve rust resistance.
Note: In the circuit board equipment, because the process of each section is different, there will be different requirements for the potion, and the temperature. Therefore, when choosing the material of the axis, it is a very important part. The harm of choosing the wrong material is also very big, so if you do not know what material to choose, please tell us the use environment, we can give the most professional advice.
Introduction: Carbon fiber material axis is widely used in the conveying section of circuit board equipment, because of its light weight, high strength, corrosion resistance and other advantages, very suitable for high-speed, high-precision industrial equipment.
Features:
Light weight: carbon fiber axis density is low, the weight is significantly lower than the metal axis. Lightweight materials reduce the overall mass of the equipment, reduce energy consumption, and improve the efficiency of the delivery system.
High strength and rigidity: Although the carbon fiber axis is light, its strength and rigidity are excellent. It can maintain stable deformation under high load and high speed operation to ensure the stability and accuracy of the circuit board in the conveying process.
Corrosion resistance: Circuit board production environment often involves acid, alkali and other corrosive chemicals, carbon fiber material corrosion resistance, can effectively extend the service life of the shaft, reduce maintenance and replacement costs.
Low thermal expansion coefficient: the thermal expansion coefficient of carbon fiber is low, and the temperature change has little effect on its size, which helps to improve the temperature control accuracy of the circuit board conveying section and ensure the smooth operation of the conveying section in the thermal expansion and cold contraction environment.
Fatigue resistance: carbon fiber material axis has excellent fatigue resistance, suitable for high-frequency use. Even in long-term continuous operation, the performance remains stable, which plays an important role in production efficiency and equipment reliability.
Note: In the circuit board equipment, because the process of each section is different, there will be different requirements for the potion, and the temperature. Therefore, when choosing the material of the axis, it is a very important part. The harm of choosing the wrong material is also very big, so if you do not know what material to choose, please tell us the use environment, we can give the most professional advice.
Introduction: In the circuit board production equipment, the glass fiber material axis of the conveying section plays the role of support, guidance and transmission torque. This material choice is often used in environments where high temperatures, wear resistance and chemical stability are required.
Features:
High temperature resistance: glass fiber material can withstand high temperature environment, suitable for PCB production involved in heating, drying and other process segments.
Wear resistance: In long-term operation, the wear resistance of the glass fiber material can extend the life of the shaft and reduce the need for maintenance.
Noise reduction: Compared with metal materials, glass fiber materials produce lower noise during operation, improving the comfort of the operating environment.
Note: In the circuit board equipment, because the process of each section is different, there will be different requirements for the potion, and the temperature. Therefore, when choosing the material of the axis, it is a very important part. The harm of choosing the wrong material is also very big, so if you do not know what material to choose, please tell us the use environment, we can give the most professional advice.
102, No.14-1 Jixiang 3rd Road, Yixin Community, Longgang District, Shenzhen, Guangdong Province, China.
+ 86 181 8840 4906
eternal02023@gmail.com
We’re professional manufacturer of PCB equipment and consumable. We can give you the best advice for your requirements.
© All Rights Reserved.
Eternal Tech is committed to becoming an expert in PCB conveying systems.
Optimized by Seraphinite Accelerator